74LV4052PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 135Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 6V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV4052 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 80μA |
| Power Dissipation | 400mW |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 190 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 125 ns |
| On-State Resistance (Max) | 85Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 46ns, 32ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 56ns |
| Voltage - Supply, Single (V+) | 1V~6V |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74LV4052PW,112 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. 4:1 is the ratio between multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. 16 terminations have been made so far. High-quality output is provided by the electronic component's 4 channels. When a voltage supply of 6V is used, the electronic component should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. Multiplexers built on a SP4T switching circuit are built. A total of 2 circuits make up this switch device. Try searching for 74LV4052 variants of the analog switch ic. An switch multiplexer with 135Ohm internal resistance has a value of 135Ohm. Please refer to the datasheets for 16 pins functions. Multiplexers should not be powered above 6V in normal situations. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 1V should be the lowest voltage fed to the electronic component. In order to operate this switch device, it would need a current of 80μA. Analogue multiplexers require a 1V~6V voltage to drain from a single voltage supply. With a DIFFERENTIAL MULTIPLEXER analog IC integrated into the board. This electrical part is compatible with 3.3V operating voltages. Operating the 8 inputs requires 8 inputs. 200MHz bandwidths enable data to be transferred.
74LV4052PW,112 Features
4 Channels
Switch Circuit: SP4T
80μA Supply Current
Bandwidth: 200MHz
74LV4052PW,112 Applications
There are a lot of Nexperia USA Inc. 74LV4052PW,112 Analog Switches & Multiplexers ICs applications.
- Industrial
- Imaging
- DSUs
- Multi-Line E1 Interface Cards
- Sample-and-hold systems
- Microprocessor Controlled Analog Systems
- Sample hold systems
- Cross Connects
- Audio/video switches
- CSU
