74LV4053BQ,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 165Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV4053 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 6 |
| Number of Circuits | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 80μA |
| Power Dissipation | 500mW |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 125 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Dual, Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 95 ns |
| On-State Resistance (Max) | 105Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 31ns, 24ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 97ns |
| Switch-off Time-Max | 70ns |
| Voltage - Supply, Single (V+) | 1V~6V |
| Height Seated (Max) | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LV4053BQ,115 Overview
Shipping overseas is convenient with the electronic component packed in 16-VFQFN Exposed Pad. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. 2:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. There are 16 terminations totally. The electronic part provides high-quality output because it has 6 channels. Powered by a 2V voltage supply, the electrical part should be switched on and run. The electronic part body is injected with 16 pins. Based on SPDT switching circuits, these analog multiplexers work. A total of 3 circuits make up this switch device. Use 74LV4053 to search for variants of the digital switches. A 165Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 16 pins functions. Users shouldn't supply more than 6V voltage to the switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. 1V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 80μA. This analog switch requires a voltage of 1V~6V to drain from a single voltage supply. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. 3.3V operating voltages are supported by the electronic component. 200MHz-bandwidths can be used to transfer data between multiplexers.
74LV4053BQ,115 Features
6 Channels
Switch Circuit: SPDT
80μA Supply Current
Bandwidth: 200MHz
74LV4053BQ,115 Applications
There are a lot of Nexperia USA Inc. 74LV4053BQ,115 Analog Switches & Multiplexers ICs applications.
- MP3 players
- Precision data acquisition
- Battery Powered Instruments
- Audio and video routing
- Microprocessor controlled systems
- Communication systems
- Mechanical reed relay replacement
- Automatic test equipment
- Industrial
- Imaging
