74LV4053D-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 165Ohm |
| Max Power Dissipation | 500mW |
| Base Part Number | 74LV4053 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 6 |
| Number of Circuits | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 80μA |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 29 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 30 ns |
| On-State Resistance (Max) | 105Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 31ns, 24ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -60dB @ 1MHz |
| Voltage - Supply, Single (V+) | 1V~6V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74LV4053D-Q100J Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operational temperature extended around -40°C~125°C TA. By its 6 channels, the electronic component provides high-quality output. A key feature of the 16 series is the inclusion of this electronic part as part of its design. SPDT switching circuits are used in these analog switch ics. There are 3 circuits in this multiplexer. 74LV4053 can be used to search for analog multiplexer variants. It has an internal resistance of 165Ohm. Datasheets for functions of 16 pins are available. It is normally recommended that users do not supply the multiplexer with voltages higher than 6V. The analog switch ic is of the Single supply type and is cost-effective. There should be 1V voltage fed to the electrical part below 1V. This multiplexer would work with 80μA current. Using only a single voltage supply, this analog switch requires 1V~6V voltage. Operating voltages range from 3.3V. 200MHz-bandwidths can be used to transfer data between multiplexers. The Automotive, AEC-Q100 series includes it.
74LV4053D-Q100J Features
6 Channels
Switch Circuit: SPDT
80μA Supply Current
Bandwidth: 200MHz
74LV4053D-Q100J Applications
There are a lot of Nexperia USA Inc. 74LV4053D-Q100J Analog Switches & Multiplexers ICs applications.
- Routers
- Cellular phones
- PBXs
- Battery Powered Systems
- SONET/SDH ADM
- Medical systems
- Imaging
- Channel Banks
- Audio/video switches
- Frame Relay Equipment
