74LV4053D,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 2V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV4053 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 6V |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 105Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 31ns, 24ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 97ns |
| Switch-off Time-Max | 70ns |
| Voltage - Supply, Single (V+) | 1V~6V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
74LV4053D,112 Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Around -40°C~125°C TA is the extended operating temperature. 16 terminations have been made so far. A high-quality output is provided by the electrical component's 2 channels. When a voltage supply of 2V is used, the electronic component should be turned on and run. This electronic part can be found in the 16 series. These analog multiplexers are built based on SPDT switching circuits. There are 3 circuits in this switch device. Using the 74LV4053 search parameter, you can discover variants of the switch. The voltage required by this switch device is 1V~6V, draining from a single voltage supply. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC.
74LV4053D,112 Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 200MHz
74LV4053D,112 Applications
There are a lot of Nexperia USA Inc. 74LV4053D,112 Analog Switches & Multiplexers ICs applications.
- Fault Tolerant Systems
- Microprocessor Controlled Analog Systems
- ATM
- SDH
- Data Acquisition Systems
- Precision data acquisition
- Battery-powered systems
- Battery Powered Instruments
- Low-Voltage
- Avionics test equipment
