74LV4053D,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 105Ohm |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 2V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV4053 |
| Pin Count | 16 |
| Number of Outputs | 3 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 80μA |
| Power Dissipation | 500mW |
| Propagation Delay | 12 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Dual, Single |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 105Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Number of Input Lines | 6 |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 31ns, 24ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 97ns |
| Switch-off Time-Max | 70ns |
| Voltage - Supply, Single (V+) | 1V~6V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LV4053D,118 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Surface Mount is where this multiplexer is located. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. In total, there are 16 terminations. The electronic part provides high-quality output because it has 2 channels. Turning on and running the electrical part should be easy with a 2V voltage supply. It is part of the design of the 16 series that this electronic component is included. Unlike digital switches, these are based on SPDT switching circuits. Try searching with 74LV4053 if you're looking for variants. There is 105Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. Users shouldn't supply more than 6V voltage to the switch device. A cost-effective Dual, Single supply type analogue multiplexer. 1V is the lowest voltage that should be fed to the electronic electronic part. It would be sufficient to run this analogue multiplexer with 80μA current. An analogue multiplexer drains from a single voltage supply at 1V~6V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. This electrical part is compatible with 3.3V operating voltages. 3 outputs are included in the analogue multiplexer.
74LV4053D,118 Features
2 Channels
Switch Circuit: SPDT
80μA Supply Current
-3db Bandwidth: 200MHz
74LV4053D,118 Applications
There are a lot of Nexperia USA Inc. 74LV4053D,118 Analog Switches & Multiplexers ICs applications.
- Transmit
- Battery Powered Systems
- 65 V DACs
- USB 1.1 signal switching circuits
- Medical systems
- Industrial
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Access Concentrators
- PBXs
- Power routing
