74LV4053DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 165Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 2V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV4053 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 6 |
| Number of Circuits | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 80μA |
| Power Dissipation | 500mW |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 125 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Dual, Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 95 ns |
| On-State Resistance (Max) | 105Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 31ns, 24ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 97ns |
| Switch-off Time-Max | 70ns |
| Voltage - Supply, Single (V+) | 1V~6V |
| Height Seated (Max) | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74LV4053DB,112 Overview
Shipping overseas is convenient with the electronic component packed in 16-SSOP (0.209, 5.30mm Width). In order to provide high reliability, an advanced packaging method Tube is used. Mounted in Surface Mount is this multiplexer. There is 2:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. Totally, there are 16 terminations. A 6 channel electronic part produces high-quality output. When the electronic component is given a voltage of 2V, it should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. Circuits based on SPDT switching are used to construct these analog switch ics. There are 3 circuits in this switch device. 74LV4053 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 165Ohm. The functions of 16 pins can be found in the datasheets. Multiplexers should not be powered above 6V in normal situations. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 1V should be the lowest voltage fed to the electronic component. The switch device would be able to operate with 80μA current. An analogue multiplexer drains from a single voltage supply at 1V~6V. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. Operating voltages range from 3.3V. It is possible to transfer data over a 200MHz-bandwidth.
74LV4053DB,112 Features
6 Channels
Switch Circuit: SPDT
80μA Supply Current
Bandwidth: 200MHz
74LV4053DB,112 Applications
There are a lot of Nexperia USA Inc. 74LV4053DB,112 Analog Switches & Multiplexers ICs applications.
- Precision test equipment
- E1 Network Equipment
- Microwave transmission systems
- Video signal routing
- Cell phones
- Fiber to the Home
- Battery Powered Instruments
- Fault Tolerant Systems
- Automatic test equipment
- Intelligent PBX
