74LV4053DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 165Ohm |
| Max Power Dissipation | 400mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 2V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV4053 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 6 |
| Number of Circuits | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 80μA |
| Power Dissipation | 500mW |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 125 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Dual, Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 95 ns |
| On-State Resistance (Max) | 105Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 31ns, 24ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 97ns |
| Switch-off Time-Max | 70ns |
| Voltage - Supply, Single (V+) | 1V~6V |
| Height Seated (Max) | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74LV4053DB,118 Overview
Packed in 16-SSOP (0.209, 5.30mm Width), the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Extended operating temperature around -40°C~125°C TA. Totally, there are 16 terminations. High-quality output is provided by the electronic component's 6 channels. In the case of a voltage supply of 2V volts, the electrical part can be powered up and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Multiplexers built on a SPDT switching circuit are built. A 3 circuit is present in this switch device. Try searching with 74LV4053 if you're looking for variants. A 165Ohm internal resistance characterizes this multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. Users should never supply a voltage higher than 6V to a switch device. A cost-effective Dual, Single supply type analogue multiplexer. The lowest voltage the electronic part should receive is 1V. This multiplexer would work with 80μA current. The voltage required by this switch device is 1V~6V, draining from a single voltage supply. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. Operating voltages range from 3.3V. 200MHz-bandwidths can be used to transfer data between multiplexers.
74LV4053DB,118 Features
6 Channels
Switch Circuit: SPDT
80μA Supply Current
Bandwidth: 200MHz
74LV4053DB,118 Applications
There are a lot of Nexperia USA Inc. 74LV4053DB,118 Analog Switches & Multiplexers ICs applications.
- T1/E1 Terminals
- Imaging
- Routers
- Automotive applications
- Cellular phones
- Industrial control systems
- Intelligent PBX
- Video switching
- Industrial and process control systems
- Sample-and-hold systems
