74LV4053N,112
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 2V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV4053 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 6V |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 105Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 31ns, 24ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 97ns |
| Switch-off Time-Max | 70ns |
| Voltage - Supply, Single (V+) | 1V~6V |
| Signal Current-Max | 0.025A |
| Height Seated (Max) | 4.2mm |
| Length | 19.025mm |
| RoHS Status | ROHS3 Compliant |
74LV4053N,112 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-DIP (0.300, 7.62mm). This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Through Hole. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Around -40°C~125°C TA is the extended operating temperature. In total, there have been 16 terminations. The electronic part delivers high-quality output through its 2 channels. If the voltage supply is 2V volts, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPDT switching circuits. There are 3 circuits in this switch device. Look for analog switch ic variants by searching with 74LV4053. Multiplexer or Switches is a typical switch device. A voltage of 1V~6V is required to drain this analog switch from a single voltage supply. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER.
74LV4053N,112 Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 200MHz
74LV4053N,112 Applications
There are a lot of NXP USA Inc. 74LV4053N,112 Analog Switches & Multiplexers ICs applications.
- Relay Replacement
- Battery Powered Systems
- HDTV
- Data Acquisition Systems
- SONET
- 65 V DACs
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Data switching
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- MP3 players
