74LV4053PW-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 165Ohm |
| Max Power Dissipation | 500mW |
| Base Part Number | 74LV4053 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Number of Channels | 6 |
| Number of Circuits | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 80μA |
| Power Dissipation | 500mW |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 29 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 30 ns |
| On-State Resistance (Max) | 105Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 31ns, 24ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -60dB @ 1MHz |
| Voltage - Supply, Single (V+) | 1V~6V |
| RoHS Status | ROHS3 Compliant |
74LV4053PW-Q100J Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. There is an analog multiplexer mounted in position Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~125°C TA. This electronic part offers high-quality output due to its 6 channels. A total of 16 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SPDT switching circuits. A 3 circuit is present in this switch device. Using the 74LV4053 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 165Ohm. To find out what the 16 pins do, please refer to the datasheets. Users should never supply a voltage higher than 6V to a switch device. Analog switch ics with Single supply type are cost-effective. There should be 1V voltage fed to the electrical part below 1V. In order to operate this switch device, it would need a current of 80μA. This analog switch requires a voltage of 1V~6V to drain from a single voltage supply. There is a voltage range of 3.3V operating voltages for the electrical part. The data can be transferred over a wide range of bandwidths, called 200MHz bandwidths. This is electronic component of the Automotive, AEC-Q100 series.
74LV4053PW-Q100J Features
6 Channels
Switch Circuit: SPDT
80μA Supply Current
Bandwidth: 200MHz
74LV4053PW-Q100J Applications
There are a lot of Nexperia USA Inc. 74LV4053PW-Q100J Analog Switches & Multiplexers ICs applications.
- PBXs
- Routers
- Battery Powered Systems
- Channel Banks
- Transmit
- Optical Applications
- Channelized and Unchannelized DS3 applications
- Video signal routing
- ISDN NT1/TA
- Microprocessor Controlled Analog Systems
