74LV4053PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 165Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 2V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV4053 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 80μA |
| Power Dissipation | 500mW |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 125 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Supply Type | Dual, Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 95 ns |
| On-State Resistance (Max) | 105Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 31ns, 24ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 97ns |
| Switch-off Time-Max | 70ns |
| Voltage - Supply, Single (V+) | 1V~6V |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LV4053PW,112 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tube. The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Around -40°C~125°C TA is the extended operating temperature. Total terminations are 16. A high-quality output is provided by the electrical component's 2 channels. It is safe to turn on and run the electronic component with a 2V voltage supply. A total of 16 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SPDT switching circuits. This multiplexer is composed of 3 circuits. 74LV4053 can be used to search for analog multiplexer variants. Analog switches have 165Ohm internal resistance. Please refer to the datasheets for 16 pins functions. In normalcircumstances, users should not exceed 6V volts for the multiplexer. An effective Dual, Single supply digital multiplexer. There should be 1V voltage fed to the electrical part below 1V. For this multiplexer to operate, 80μA current would be sufficient. Using only a single voltage supply, this analog switch requires 1V~6V voltage. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. Operating voltages range from 3.3V. Among the inputs that can be operated are the 6 inputs. In 200MHz-bandwidths, data can be transferred.
74LV4053PW,112 Features
2 Channels
Switch Circuit: SPDT
80μA Supply Current
Bandwidth: 200MHz
74LV4053PW,112 Applications
There are a lot of Nexperia USA Inc. 74LV4053PW,112 Analog Switches & Multiplexers ICs applications.
- Audio signal routing
- SDH/SONET multiplexers
- Battery-powered systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- Remote Powered Equipment
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Signal routing between systems
- SONET/SDH ADM
- HDTV
- SONET
