74LV4060PW,112
| Parameters | |
|---|---|
| Load Capacitance | 50pF |
| Propagation Delay | 105 ns |
| Quiescent Current | 160μA |
| Turn On Delay Time | 105 ns |
| Reset | Asynchronous |
| Family | LV/LV-A/LVX/H |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 14 |
| Trigger Type | Negative Edge |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 90MHz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2011 |
| Series | 74LV |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 1V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV4060 |
| Pin Count | 16 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 1V |
74LV4060PW,112 Overview
This device is supplied in the 16-TSSOP (0.173, 4.40mm Width) package. The configuration of this device is based on 16terminations. With a supply voltage of 3.3V volts, it is possible to run it in a fully flexible manner. There are 1 terminations on the device. In all, there are 16 pins on each component. Packaging is based on Tube. In the circuit, there are 16pins that connect other components. It is mounted using the way of [0]. The LV/LV-A/LVX/Hfamily includes it. This device is a member of the 74LVseries and is well suited for a wide range of applications. Binary Counteris adopted as the logic type. -40°C~125°Cshould be the operating temperature. A mounting type of Surface Mountis adopted. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 14bits for each element. Under its base part number of [0], you will find additional related parts. In order to operate, it requires a voltage of [0]. It is possible to supply the device with the minimum supply voltage (Vsup) of 1V. It is possible to reach a maximum supply voltage of 5.5VV (Vsup). It consumes quiescent current at 160μA.
74LV4060PW,112 Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
14 bits per element
Operating supply voltage of 3.3V
74LV4060PW,112 Applications
There are a lot of Nexperia USA Inc. 74LV4060PW,112 Counters & Dividers applications.
- LINEARIZATION
- Analog multiplexing and demultiplexing
- Signal gating
- ALGEBRAIC COMPUTATION
- Clocks
- Control counters
- Fixed or Programmable Frequency Division
- VHF, UHF, FM, AM, etc.
- Frequency dividers
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
