74LV4066N,112
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV4066 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 1/6V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 35Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 16ns, 28ns |
| Crosstalk | -60dB @ 1MHz |
| Switching | MAKE-BEFORE-BREAK |
| Switch-on Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 1V~6V |
| Normal Position | NO |
| Length | 19.025mm |
| RoHS Status | ROHS3 Compliant |
74LV4066N,112 Overview
The electronic component is convenient to ship overseas because it is packed in a 14-DIP (0.300, 7.62mm). To ensure high reliability, a new packaging method Tube is used. In Through Hole, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 1:1. Operational temperature extended around -40°C~125°C TA. In total, 14 terminations have occurred. A high-quality output is provided by the electrical component's 1 channels. An 3.3V voltage supply should allow the electrical part to be turned on and run. An electrical component like this is included in the 14 series. A SPST - NO switching circuit is used to build these analog multiplexers. This multiplexer is composed of 4 circuits. Using the 74LV4066 search parameter, you can discover variants of the switch. A analogue multiplexer of this type is a Multiplexer or Switches. A voltage of 1V~6V is required for this switch device, which drains from a single voltage source. A total of SEPARATE OUTPUT outputs are available on this analog switch ic.
74LV4066N,112 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 200MHz
74LV4066N,112 Applications
There are a lot of NXP USA Inc. 74LV4066N,112 Analog Switches & Multiplexers ICs applications.
- Sample-and-hold systems
- Isolation
- T1/E1 Terminals
- Voice over IP/DSL – Integrated Access Devices, Smart
- Microwave transmission systems
- Cross Connects
- Switching Systems
- Cable Modem
- Remote Powered Equipment
- Audio signal routing
