banner_page

74LVC138AD-Q100J

1.2V~3.6V 16 Pin 74LVC138 Signal switch74LVC Series Min 1.65V VMax 3.6V V


  • Manufacturer: Nexperia USA Inc.
  • Nocochips NO: 554-74LVC138AD-Q100J
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 891
  • Description: 1.2V~3.6V 16 Pin 74LVC138 Signal switch74LVC Series Min 1.65V VMax 3.6V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Supplier Device Package 16-SO
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Published 2011
Series 74LVC
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type Decoder/Demultiplexer
Max Operating Temperature 125°C
Min Operating Temperature -40°C
Max Power Dissipation 500mW
Voltage - Supply 1.2V~3.6V
Base Part Number 74LVC138
Circuit 1 x 3:8
Polarity Inverting
Max Supply Voltage 3.6V
Min Supply Voltage 1.65V
Propagation Delay 5.2 ns
Quiescent Current 10μA
Logic Function Decoder, Demultiplexer
Current - Output High, Low 24mA 24mA
Supply Type Single
High Level Output Current 24mA
Low Level Output Current 24mA
Number of Input Lines 3
Voltage Supply Source Single Supply
Independent Circuits 1
Number of Output Lines 8
RoHS Status ROHS3 Compliant

74LVC138AD-Q100J Overview


Providing this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.As a result, it is packaged in the way of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses an analog IC Decoder/Demultiplexer.The operating temperature of -40°C~125°C will not be susceptible to external factors.With a supply voltage of 1.2V~3.6V, designers have greater flexibility of digital controlled switch.With the 74LVC series, the multiplexers are suitable for a diverse range of applications.The base part number is 74LVC138, which can also be used to find its logic switch related parts.Single is employed as its supply type.The board is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.Not being affected by the external factors, consumes 10μA current of multiplexer ic.It is possible to accept voltage levels through 3 input lines of multiplexers.A signal source consists of 8 output lines.Signal switchs at temperatures up to 125°C are acceptable.Temperatures of the multiplexer should be kept at -40°C.The device is specified to operate at the maximum supply voltage of 3.6V in accordance with its applicable specification.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 1.65V.

74LVC138AD-Q100J Features


Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
3 input lines
8 output lines

74LVC138AD-Q100J Applications


There are a lot of Nexperia USA Inc. 74LVC138AD-Q100J Signal Switches / Multiplexers / Decoders applications.

  • Logic circuits
  • LVDS
  • Memory system of computers
  • Logic gates for other digital devices
  • To select different task for memory in microprocessor memory systems
  • Signal router
  • Solenoid cooling fan
  • Microprocessor input/output systems
  • Textile mills
  • Automatic health monitoring systems

Write a review

Note: HTML is not translated!
    Bad           Good