74LVC157ADB-Q100J
| Parameters | |
|---|---|
| Length | 6.2mm |
| Width | 5.3mm |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74LVC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 1.2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC157 |
| Pin Count | 16 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Propagation Delay | 4.8 ns |
| Quiescent Current | 100nA |
| Family | LVC/LCX/Z |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Output Polarity | TRUE |
| Number of Input Lines | 8 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 4 |
| Height Seated (Max) | 2mm |
74LVC157ADB-Q100J Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-SSOP (0.209, 5.30mm Width).The package is packaged in the manner of Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.In the multiplexers, the analog IC is indicated by Multiplexer.In the case of -40°C~125°C, turn signal switch will not be affected by external factors.Using a 1.2V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers from the 74LVC series can be used in a wide range of applications.Among its basic configurations are 16 terminations.In addition, it also has a base part number of 74LVC157, which can be used to find related parts.In multiplexer's system, 3.3V is the voltage supplied.This turn signal switch contains 16 component pins.As a result, GULL WING represents the end of the conductors.Its supply type is Single, which is used as the source of power.A total of 16 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the LVC/LCX/Z family.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.It consumes 100nA current of multiplexer ic since it is not affected by external factors.It is possible to accept voltage levels by using one of the 8 input lines of multiplexers.A signal source has 4 output lines.
74LVC157ADB-Q100J Features
Supplied in the 16-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
8 input lines
4 output lines
74LVC157ADB-Q100J Applications
There are a lot of Nexperia USA Inc. 74LVC157ADB-Q100J Signal Switches / Multiplexers / Decoders applications.
- Paper plants
- Used to connect a single source to multiple destinations
- Enabling different rows of memory depending on address in memory chips
- Decimal decoder
- Solenoid cooling fan
- Telephone network
- Combinational circuit
- Time division multiplexing system
- Audio transmission
- Code conversion
