74LVC162244APFG
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TFSOP |
| Number of Pins | 48 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 6.9 ns |
| Quiescent Current | 10μA |
| Family | LVC/LCX/Z |
| Logic Function | Buffer, Inverting |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.012 A |
| Number of Bits per Element | 4 |
| High Level Output Current | -12mA |
| Low Level Output Current | 12mA |
| Control Type | ENABLE LOW |
| Height Seated (Max) | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVC162244APFG Overview
Logical driver uses a neat TFSOP package. 48 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. There is a LVC/LCX/Z family part that is attached to this electronic component. 48 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 48 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 10μA. To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the logical driver. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 12mA to its low level. In high level output mode, the electronic parts may conduct -12mA of current. Voltage used to run voltage buffer should be 2.7V at least. In regard to the maximum supply voltage, buffer driver is rated 3.6V. It is known as a BUS DRIVER logic IC. It is sufficient to make 16 outputs.
74LVC162244APFG Features
Bus Driver/Transceivers
High Level Output: 12mA
Low Level Output: -12mA
BUS DRIVER Logic IC
74LVC162244APFG Applications
There are a lot of Integrated Device Technology (IDT) 74LVC162244APFG Buffers & Transceivers applications.
- Point-to-point networking
- Carrier phase observations
- Metro access rings
- Vehicle, ship, aircraft navigation and positioning
- Car alarm systems
- Fast Ethernet
- transmission relay
- Broadcast application
- Radio transmission
- Tuner
