74LVC162245APVG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | WITH DIRECTION CONTROL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 16 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Propagation Delay | 4.8 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | Inverting, Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Logic IC Type | BUS TRANSCEIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | 12mA |
| Low Level Output Current | 12mA |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVC162245APVG Overview
Logical driver uses a neat SSOP package. All of the 2 elements are put into use. 48 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. This electronic part belongs to the LVC/LCX/Z family of parts. 48 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 48 pins. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. In quiescent state, the electronic part uses 10μA. To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the logical driver. Logical driver features WITH DIRECTION CONTROL to better serve the need. 16 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 12mA to its low level. In high level output mode, the electronic parts may conduct 12mA of current. Voltage used to run voltage buffer should be 2.7V at least. In regard to the maximum supply voltage, buffer driver is rated 3.6V. It is known as a BUS TRANSCEIVER logic IC.
74LVC162245APVG Features
WITH DIRECTION CONTROL
High Level Output: 12mA
Low Level Output: 12mA
BUS TRANSCEIVER Logic IC
74LVC162245APVG Applications
There are a lot of Integrated Device Technology (IDT) 74LVC162245APVG Buffers & Transceivers applications.
- Wireless access points
- Car radio
- Data center
- Radio transmission
- Digital systems
- AV receiver
- Point-to-point networking
- Fast Ethernet
- Interconnection between switches and computers
- LAN, SAN, WAN (local, storage, work area networks)
