banner_page

74LVC16373ADGG-Q1J

D-Type, Latch 1.65V~3.6V 8 Bits Tri-State Latches Automotive, AEC-Q100, 74LVC Series 48 Pins DUAL CMOS 48-TFSOP (0.240, 6.10mm Width)


  • Manufacturer: Nexperia USA Inc.
  • Nocochips NO: 554-74LVC16373ADGG-Q1J
  • Package: 48-TFSOP (0.240, 6.10mm Width)
  • Datasheet: PDF
  • Stock: 164
  • Description: D-Type, Latch 1.65V~3.6V 8 Bits Tri-State Latches Automotive, AEC-Q100, 74LVC Series 48 Pins DUAL CMOS 48-TFSOP (0.240, 6.10mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-TFSOP (0.240, 6.10mm Width)
Number of Pins 48
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Published 2010
Series Automotive, AEC-Q100, 74LVC
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 48
Additional Feature SEATED-HGT NOM
Technology CMOS
Voltage - Supply 1.65V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 2
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Pin Count 48
Output Type Tri-State
Circuit 8:8
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 1.65V
Number of Ports 2
Number of Bits 8
Turn On Delay Time 1 ns
Family LVC/LCX/Z
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Output Polarity TRUE
Propagation Delay (tpd) 14.4 ns
Independent Circuits 2
Width 6.1mm
RoHS Status ROHS3 Compliant

74LVC16373ADGG-Q1J Overview


In the 48-TFSOP (0.240, 6.10mm Width) package, it can be found as an embedded module. It is packaged in the way of Tape & Reel (TR). It uses Tri-State as the output. This electrical device has the logic type D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. A 1.65V~3.6V supply voltage is required to operate it. A temperature of -40°C~125°C is set as the operating temperature. This FPGA is part of the Automotive, AEC-Q100, 74LVC series. The design of this electronic part is based on 8 bits. In this device, there are 48 terminations that have been designed. The supply voltage of the device is 3.3V. The device is equipped with 48 pins. It is a member of the LVC/LCX/Z family of electronic devices. There are 48 pins on it. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports on board, which are all available at the same time. When Vsup reaches 3.6V, the maximal supply voltage is reached. It is recommended to have a higher supply voltage (Vsup) than 1.65V. SEATED-HGT NOM are also a characteristic of it.

74LVC16373ADGG-Q1J Features


48-TFSOP (0.240, 6.10mm Width) package
Automotive, AEC-Q100, 74LVC series
8 Bits
48 pin count
48 pins

74LVC16373ADGG-Q1J Applications


There are a lot of Nexperia USA Inc. 74LVC16373ADGG-Q1J Latches applications.

  • Registers
  • Decade counting
  • Counter
  • Counter timers
  • Parallel-to-Serial Data Conversion
  • Programmable binary
  • Up/down difference counting
  • Display
  • Parallel data storage
  • Lamp and Display (LED)

Write a review

Note: HTML is not translated!
    Bad           Good