banner_page

74LVC16373ADGGRG4

D-Type, Latch 1.65V~3.6V 16 Bits Tri-State Latches 74LVC Series 74LVC16373 48 Pins DUAL CMOS 48-TFSOP (0.240, 6.10mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-74LVC16373ADGGRG4
  • Package: 48-TFSOP (0.240, 6.10mm Width)
  • Datasheet: -
  • Stock: 806
  • Description: D-Type, Latch 1.65V~3.6V 16 Bits Tri-State Latches 74LVC Series 74LVC16373 48 Pins DUAL CMOS 48-TFSOP (0.240, 6.10mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-TFSOP (0.240, 6.10mm Width)
Number of Pins 48
Weight 223.195796mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74LVC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 48
ECCN Code EAR99
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 1.65V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 1.8V
Terminal Pitch 0.5mm
Base Part Number 74LVC16373
Pin Count 48
Output Type Tri-State
Number of Elements 2
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3.3V
Supply Voltage-Min (Vsup) 1.65V
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 16
Propagation Delay 4.2 ns
Turn On Delay Time 2.1 ns
Family LVC/LCX/Z
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW
Number of Output Lines 16
Count Direction UNIDIRECTIONAL
Translation N/A
Height 1.2mm
Length 12.5mm
Width 6.1mm
Thickness 1.15mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

74LVC16373ADGGRG4 Overview


It is embedded in the 48-TFSOP (0.240, 6.10mm Width) package. Tape & Reel (TR) is the way it is packaged. In this configuration, the output is set to Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. A voltage of 1.65V~3.6V is used as the supply voltage for this device. It operates at -40°C~85°C degrees Celsius. This FPGA is part of the 74LVC series. The electronic part in this image has 16 bits. In this device, there are 48 terminations. The family 74LVC16373 includes it. The supply voltage of the device is 1.8V. The device is equipped with 48 pins. This electronic device is categorized as a LVC/LCX/Z electronic device. The pin configuration of the device is 48. A Surface Mount mounting method has been used for this electronic part. In this device, there are 2 ports. FF/Latches is the subcategory of this part. Vsup reaches 3.6V as the maximum supply voltage. 3.3V power supplies are needed to operate it. Ensure that the supply voltage (Vsup) is greater than 1.65V. The reliability of this device makes it well suited to TR. It features maximum flexibility in design due to 24mA output current. There are 16 output lines that correspond to the binary equivalents of the input line. It consists of 2 elements.

74LVC16373ADGGRG4 Features


48-TFSOP (0.240, 6.10mm Width) package
74LVC series
16 Bits
74LVC16373 family
48 pin count
48 pins
3.3V power supplies
2 elements

74LVC16373ADGGRG4 Applications


There are a lot of Texas Instruments 74LVC16373ADGGRG4 Latches applications.

  • Counters
  • Network Switches
  • Multistage ripple counting
  • Synchronous frequency dividers
  • Stacked or Push-Down Registers
  • Decade counting
  • Parallel Output
  • Frequency dividing
  • Serial Input
  • Pattern Generators

Write a review

Note: HTML is not translated!
    Bad           Good