74LVC16373APAG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 6.3 ns |
| Turn On Delay Time | 2.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Independent Circuits | 2 |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVC16373APAG8 Overview
Package TSSOP includes it. The package is in the form of Tape & Reel (TR). There are 16 bits in this electronic part. The device consists of 48 terminations that are designed to be used in conjunction with it. The device works with a voltage of 3.3V for its supply voltage. 48 pins are included. It is part of the family of electronic devices called LVC/LCX/Z. The device has 48 pins. The electronic part is mounted in a way that corresponds to Surface Mount. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part is in the FF/Latches subcategory. Based on its reliable performance, this device is suitable for TAPE AND REEL. For maximum efficiency, the supply voltage should be set to 3.3V. There is 24mA low level output current set. It is set to zero for the high level output current. Ideally, the operating temperature should be lower than 85°C. The operating temperature should be higher than -40°C. There is a maximum voltage supply of 3.6V that can be applied to it. The minimal voltage for operation is 2.7V. There is a logic IC that it uses that is a BUS DRIVER.
74LVC16373APAG8 Features
TSSOP package
16 Bits
48 pin count
48 pins
74LVC16373APAG8 Applications
There are a lot of Integrated Device Technology (IDT) 74LVC16373APAG8 Latches applications.
- Watches
- Display driver
- Pattern Generators
- Sample and hold register
- Hammer
- Meter applications
- Decade counting
- Shift register
- A/D and D/A conversion
- Automotive Cluster
