74LVC16373APVG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 6.3 ns |
| Turn On Delay Time | 2.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Independent Circuits | 2 |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVC16373APVG8 Overview
A package called SSOP contains it. Electronic parts with 16 bits are designed for this application. As far as this device is concerned, it has no terminations. The supply voltage of the device is 3.3V. 48 pins are available on it. There is a device in this electronic family called LVC/LCX/Z. With the design of the board, there are only 48 pins. The electronic part is mounted using the Surface Mount method. This device has 2 ports. FF/Latches is the subcategory of this part. Based on its reliable performance, this device is suitable for TAPE AND REEL. The supply voltage should be maintained at 3.3V for high efficiency. 24mA is set as the low level output current. There is 24mA output current at the high level. Ideally, the operating temperature should be lower than 85°C. A temperature greater than -40°C should be used for operation. Voltages up to 3.6V can be supplied. This device requires a minimum voltage of 2.7V. It uses a logic IC of type BUS DRIVER.
74LVC16373APVG8 Features
SSOP package
16 Bits
48 pin count
48 pins
74LVC16373APVG8 Applications
There are a lot of Integrated Device Technology (IDT) 74LVC16373APVG8 Latches applications.
- High-speed logic
- Counter control
- Multi-line decoders
- Counter
- Automotive ADAS
- Communication systems
- Multistage ripple counting
- Data acquisition
- Ring counter
- PCs and Notebooks
