74LVC16374ADGG,118
| Parameters | |
|---|---|
| Current - Quiescent (Iq) | 20μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 5.4ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Clock Frequency | 300MHz |
| Propagation Delay | 14 ns |
| Quiescent Current | 100nA |
| Turn On Delay Time | 7 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
74LVC16374ADGG,118 Overview
48-TFSOP (0.240, 6.10mm Width)is the packaging method. You can find it in the Tape & Reel (TR)package. It is configured with Tri-State, Non-Invertedas an output. Positive Edgeis the trigger it is configured with. Surface Mountmounts this electrical part. A supply voltage of 1.65V~3.6V is required for operation. Currently, the operating temperature is -40°C~125°C TA. This logic flip flop is classified as type D-Type. JK flip flop is a part of the 74LVCseries of FPGAs. In order for it to function properly, its output frequency should not exceed 300MHz. A total of 2 elements are present. As a result, it consumes 20μA quiescent current and is not affected by external forces. It has been determined that there have been 48 terminations. You can search similar parts based on 74LVC16374. A voltage of 2.7V is used as the power supply for this D latch. The input capacitance of this JK flip flopis 5pF farads. An electronic device belonging to the family LVC/LCX/Zcan be found here. The electronic part is mounted in the way of Surface Mount. 48pins are included in its design. This device has the clock edge trigger type of Positive Edge. An electronic part designed with 16bits is used in this application. In this case, the maximum supply voltage (Vsup) reaches 3.6V. This D flip flop is equipped with 0 ports. There are 8 output lines on it. It consumes 100nA of quiescent current without being affected by external factors.
74LVC16374ADGG,118 Features
Tape & Reel (TR) package
74LVC series
48 pins
16 Bits
74LVC16374ADGG,118 Applications
There are a lot of Nexperia USA Inc. 74LVC16374ADGG,118 Flip Flops applications.
- Matched Rise and Fall
- EMI reduction circuitry
- Computers
- Load Control
- Storage registers
- Instrumentation
- Storage Registers
- Common Clocks
- Buffer registers
- Count Modes
