Parameters |
Number of Bits per Element |
8 |
High Level Output Current |
-24mA |
Low Level Output Current |
24mA |
Clock Edge Trigger Type |
Positive Edge |
Capacitance - Input |
4.5pF |
Length |
9.7mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
TFSOP |
Number of Pins |
48 |
Published |
2006 |
Part Status |
Discontinued |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Frequency |
150MHz |
Operating Supply Voltage |
3.3V |
Number of Elements |
2 |
Polarity |
Non-Inverting |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
2.7V |
Number of Bits |
16 |
Propagation Delay |
4.5 ns |
Quiescent Current |
10μA |
Turn On Delay Time |
6.1 ns |
Logic Function |
D-Type, Flip-Flop |
74LVC16374APFG Overview
TFSOPis the way it is packaged. A total of 2elements are present in it. The electronic part is mounted in the way of Surface Mount. It is designed with 48 pins. This device's clock edge trigger type is Positive Edge. There are 16bits in its design. Optimal efficiency requires a supply voltage of 3.3V. It consumes 10μA of quiescent current without being affected by external factors. The high level output current is set to -24mA. There is no low level output current set at 24mA. A temperature below 85°Cshould be used for operation. If the operating temperature is higher than -40°C, the system should operate properly. The system operates with a minimum supply voltage of 2.7V. 3.6Vis the maximum supply voltage supported by it. The frequency that can be achieved is 150MHz.
74LVC16374APFG Features
48 pins
16 Bits
74LVC16374APFG Applications
There are a lot of Integrated Device Technology (IDT) 74LVC16374APFG Flip Flops applications.
- Patented noise
- Safety Clamp
- Frequency Dividers
- Power down protection
- QML qualified product
- Control circuits
- Counters
- Circuit Design
- Test & Measurement
- Shift registers