74LVC16374APVG8
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Packaging | Tape & Reel |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | 5V TOLERANT INPUTS AND OUTPUTS |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 150MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 4.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 6.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 4.5pF |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVC16374APVG8 Overview
SSOPis the packaging method. There is an embedded version in the package Tape & Reel. A total of 2elements are present in it. There have been 48 terminations. It is powered from a supply voltage of 3.3V. This D flip flop belongs to the family of LVC/LCX/Z. The electronic part is mounted in the way of Surface Mount. A total of 48pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. This flip flop is designed with 16 Bits. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. The flip flop has 2ports embedded within it. For high efficiency, the supply voltage should be kept at 3.3V. Quiescent current is consumed by the D latch in the amount of 10μA. Additionally, it is characterized by 5V TOLERANT INPUTS AND OUTPUTS. There is -24mA output current at the high level. 24mA is the low level output current. Ideally, the operating temperature should be lower than 85°C. It is recommended that the operating temperature be greater than -40°C. Initially, it requires a voltage of 2.7V as the minimum supply voltage. It supports the maximal supply voltage of 3.6V. This frequency can be achieved 150MHz. This logic IC is BUS DRIVER. It is equipped with 2 Functions . It has 48 pins.
74LVC16374APVG8 Features
Tape & Reel package
48 pins
16 Bits
2 Functions
48 pin count
74LVC16374APVG8 Applications
There are a lot of Integrated Device Technology (IDT) 74LVC16374APVG8 Flip Flops applications.
- Bus hold
- Functionally equivalent to the MC10/100EL29
- Buffer registers
- Set-reset capability
- ESD protection
- Event Detectors
- Circuit Design
- Shift registers
- Asynchronous counter
- Latch-up performance
