74LVC1G175GF,132
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74LVC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.35mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LVC1G175 |
| Function | Reset |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Bits | 1 |
| Clock Frequency | 200MHz |
| Propagation Delay | 3.2 ns |
| Quiescent Current | 100nA |
| Turn On Delay Time | 2.2 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 32mA 32mA |
| Max Propagation Delay @ V, Max CL | 4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 2.5pF |
| Number of Input Lines | 1 |
| fmax-Min | 200 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 0.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC1G175GF,132 Overview
As a result, it is packaged as 6-XFDFN. It is contained within the Tape & Reel (TR)package. As configured, the output uses Non-Inverted. The trigger it is configured with uses Positive Edge. It is mounted in the way of Surface Mount. With a supply voltage of 1.65V~5.5V volts, it operates. It is operating at a temperature of -40°C~125°C TA. It belongs to the type D-Typeof flip flops. It belongs to the 74LVCseries of FPGAs. You should not exceed 200MHzin its output frequency. T flip flop consumes 40μA quiescent energy. Terminations are 6. It is a member of the 74LVC1G175 family. It is powered from a supply voltage of 2.7V. The input capacitance of this JK flip flopis 2.5pF farads. A device of this type belongs to the family of LVC/LCX/Z. There is an electronic part mounted in the way of Surface Mount. This board is designed with 6pins on it. The clock edge trigger type for this device is Positive Edge. There are 1bits in this flip flop. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. As of now, there are 1input lines. 100nAquiescent current consumed.
74LVC1G175GF,132 Features
Tape & Reel (TR) package
74LVC series
6 pins
1 Bits
74LVC1G175GF,132 Applications
There are a lot of Nexperia USA Inc. 74LVC1G175GF,132 Flip Flops applications.
- ESD performance
- Load Control
- ATE
- Digital electronics systems
- Shift Registers
- Test & Measurement
- 2 – Bit synchronous counter
- Supports Live Insertion
- Storage Registers
- Circuit Design
