74LVC1G19GW,125
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74LVC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Type | Decoder/Demultiplexer |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC1G19 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Dissipation | 250mW |
| Propagation Delay | 50 ns |
| Quiescent Current | 100nA |
| Turn On Delay Time | 13.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | Decoder, Demultiplexer, Demux |
| Current - Output High, Low | 32mA 32mA |
| Supply Type | Single |
| Number of Input Lines | 1 |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC1G19GW,125 Overview
Due to the fact that it is provided in the 6-TSSOP, SC-88, SOT-363, digital switch allows the board to be compacted.In this case, it is packaged as Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.A digital IC Decoder/Demultiplexer is used as the analog component of the multiplexers.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~125°C.Designers have greater flexibility when digital controlled switch operates at a 1.65V~5.5V supply voltage.Several applications are possible for 74LVC series multiplexers.There is a design for terminating 6 as part of its basic configuration.Its logic switch base part number is 74LVC1G19 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 1.8V voltage.In this turn signal switch, there are 6 components that can be connected to each pin.As a result, GULL WING represents the end of the conductors.The supply type of this multiplexer ic is Single.A configuration of 6 pins is used.Surface Mount is the way it is mounted.The logic switch is a member of the family of LVC/LCX/Z.The maximal supply voltage (Vsup) should be kept at 5.5V to avoid some unnecessary failures.The turn signal switch contains 2 outputs designed to operate.No external influence consumes 100nA current of multiplexer ic.If the supply voltage is set to 3.3V, reliable performance of the multiplexers can be achieved.To accept voltage levels, the multiplexers have1 input lines.
74LVC1G19GW,125 Features
Supplied in the 6-TSSOP, SC-88, SOT-363 package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
1 input lines
74LVC1G19GW,125 Applications
There are a lot of Nexperia USA Inc. 74LVC1G19GW,125 Signal Switches / Multiplexers / Decoders applications.
- Microprocessor memory systems
- Memory system of computers
- Recording transmission
- Signal router
- Frequency multiplexing system
- Seven segment displays
- Data demultiplexing
- Logic circuits
- Speed synchronization of multiple motors in industries
- Injectors
