74LVC1G3157DBVRE4

5.7ns, 3.8ns SPDT 15Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74LVC1G3157 6 Pins 2.3V SOT-23-6

Manufacturer: Texas Instruments
Nocochips NO: 815-74LVC1G3157DBVRE4
Package: SOT-23-6
Datasheet: -
Stock: 345
Description: 5.7ns, 3.8ns SPDT 15Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74LVC1G3157 6 Pins 2.3V SOT-23-6(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-6
Number of Pins	6
Weight	6.492041mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Resistance	15Ohm
Subcategory	Multiplexers or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.3V
Terminal Pitch	0.95mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74LVC1G3157
Pin Count	6
Number of Outputs	2
Qualification Status	Not Qualified
Power Supplies	3.3V
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	10μA
Propagation Delay	300 ps
Turn On Delay Time	24 ns
Supply Type	Single
Bandwidth	300MHz
Turn-Off Delay Time	13 ns
On-State Resistance (Max)	15Ohm
High Level Output Current	128mA
Low Level Output Current	128mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	57 dB
Channel Capacitance (CS(off), CD(off))	5.2pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	5.7ns, 3.8ns
Charge Injection	7pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-54dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	7.5ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Normal Position	NC
Height	1.45mm
Length	2.9mm
Width	1.6mm
Thickness	1.2mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

74LVC1G3157DBVRE4 Overview

The electronic part can be shipped overseas conveniently because it is packaged in SOT-23-6. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 6. By its 1 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 2.3V, it should be turned on and run. Electronic part bodies are injected with 6 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. There are 1 circuits in this switch device. Look for analog switch ic variants by searching with 74LVC1G3157. As far as internal resistance is concerned, it has 15Ohm. To find out what the 6 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexers or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. An effective Single supply digital multiplexer. It is recommended to use 1.65V as the lowest voltage for the electrical part. For this digital switch to work, 1μA current would suffice. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. A digital multiplexer may suffer damage if voltage is applied above 10μA. The data can be transferred over a wide range of bandwidths, called 300MHz bandwidths. Multiplexer ics with 2 outputs are available.