74LVC1G3157DBVRG4

5.7ns, 3.8ns SPDT 15Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74LVC1G3157 6 Pins 2.3V SOT-23-6

Manufacturer: Texas Instruments
Nocochips NO: 815-74LVC1G3157DBVRG4
Package: SOT-23-6
Datasheet: PDF
Stock: 740
Description: 5.7ns, 3.8ns SPDT 15Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74LVC1G3157 6 Pins 2.3V SOT-23-6(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-6
Number of Pins	6
Weight	6.492041mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
Resistance	15Ohm
Subcategory	Multiplexers or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.3V
Terminal Pitch	0.95mm
Base Part Number	74LVC1G3157
Pin Count	6
Number of Outputs	2
Power Supplies	3.3V
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	10μA
Propagation Delay	300 ps
Turn On Delay Time	24 ns
Supply Type	Single
Bandwidth	300MHz
Turn-Off Delay Time	13 ns
On-State Resistance (Max)	15Ohm
High Level Output Current	128mA
Low Level Output Current	128mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	57 dB
Channel Capacitance (CS(off), CD(off))	5.2pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	5.7ns, 3.8ns
Charge Injection	7pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-54dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	7.5ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Max Junction Temperature (Tj)	150°C
Normal Position	NC
Height	1.45mm
Length	2.9mm
Width	1.6mm
Thickness	1.2mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

74LVC1G3157DBVRG4 Overview

This electronic part is conveniently packaged in SOT-23-6, making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. In total, there are 6 terminations. A high-quality output is provided by the electrical component's 1 channels. If the voltage supply is 2.3V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 6 pins. Circuits based on SPDT switching are used to construct these analog switch ics. There are 1 circuits in this switch device. Look for analog switch ic variants by searching with 74LVC1G3157. As far as internal resistance is concerned, it has 15Ohm. To find out what the 6 pins do, please refer to the datasheets. There is a standard Multiplexers or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The digital multiplexer has a low cost Single supply. In order for the electronic part to function properly, the lowest voltage should be 1.65V. 1μA current would be enough for this multiplexer to operate. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. The analogue multiplexer may be damaged if voltage is greater than 10μA. There are various bandwidths available for data transfer. 2 outputs are included in the analogue multiplexer.