74LVC1G3157DCKRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Subcategory | Multiplexers or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Base Part Number | 74LVC1G3157 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 10μA |
| Propagation Delay | 300 ps |
| Turn On Delay Time | 24 ns |
| Supply Type | Single |
| Bandwidth | 300MHz |
| Turn-Off Delay Time | 13 ns |
| On-State Resistance (Max) | 15Ohm |
| High Level Output Current | 128mA |
| Low Level Output Current | 128mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 57 dB |
| Channel Capacitance (CS(off), CD(off)) | 5.2pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 5.7ns, 3.8ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -54dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 7.5ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Normal Position | NC |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC1G3157DCKRE4 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 6-TSSOP, SC-88, SOT-363. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature around -40°C~85°C TA extended. A total of 6 terminations have been recorded. A 1 channel electronic part produces high-quality output. When a voltage supply of 2.3V is used, the electronic component should be turned on and run. This electronic part can be found in the 6 series. Multiplexers built on a SPDT switching circuit are built. This multiplexer is composed of 1 circuits. If you are looking for variants of the digital switch, trying search with 74LVC1G3157. In this multiplexer, the internal resistance is 15Ohm. Datasheets for functions of 6 pins are available. Multiplexers or Switches is a typical switch device. Users should never supply a voltage higher than 5.5V to a switch device. The analog switch ic is of the Single supply type and is cost-effective. 1.65V is the lowest voltage the electrical component should receive. This multiplexer would work with 1μA current. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~5.5V. When the digital multiplexer is charged above 10μA, damage can occur. The data can be transferred over a wide range of bandwidths, called 300MHz bandwidths. The analogue multiplexer has 2 outputs.
74LVC1G3157DCKRE4 Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
Bandwidth: 300MHz
74LVC1G3157DCKRE4 Applications
There are a lot of Texas Instruments 74LVC1G3157DCKRE4 Analog Switches & Multiplexers ICs applications.
- Access Concentrators
- PBXs
- Power routing
- Relay replacements
- Isolation
- Digital access cross connects
- Ultrasound
- Imaging
- Automatic test equipment
- Switching Systems
