74LVC1G3157DRYRG4
| Parameters | |
|---|---|
| Turn On Delay Time | 5.7 ns |
| Supply Type | Single |
| Bandwidth | 300MHz |
| Turn-Off Delay Time | 3.8 ns |
| On-State Resistance (Max) | 15Ohm |
| High Level Output Current | 128mA |
| Low Level Output Current | 128mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 57 dB |
| Channel Capacitance (CS(off), CD(off)) | 5.2pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 5.7ns, 3.8ns |
| Charge Injection | 7pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -54dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 7.5ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Normal Position | NC |
| Height | 600μm |
| Length | 1.45mm |
| Width | 1mm |
| Thickness | 500μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 15Ohm |
| Subcategory | Multiplexers or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC1G3157 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Max Supply Current | 10μA |
| Propagation Delay | 300 ps |
74LVC1G3157DRYRG4 Overview
This electronic part is conveniently packaged in 6-UFDFN, making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Extended operating temperature around -40°C~85°C TA. The total number of terminations is 6. A high-quality output is provided by the electrical component's 1 channels. When the electronic component is given a voltage of 2.3V, it should be turned on and run. There are 6 pins injected into the electronic part body. Multiplexers built on a SPDT switching circuit are built. There are 1 circuits in this switch device. Use 74LVC1G3157 to search for variants of the digital switches. Analog switches have 15Ohm internal resistance. To find out what the 6 pins do, please refer to the datasheets. In this analog multiplexer, the value is Multiplexers or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 1.65V. This digital switch can be operated with a current of 1μA. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. When the digital multiplexer is charged above 10μA, damage can occur. 300MHz bandwidths enable data to be transferred. There are 2 outputs on the analogue multiplexer.
74LVC1G3157DRYRG4 Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
Bandwidth: 300MHz
74LVC1G3157DRYRG4 Applications
There are a lot of Texas Instruments 74LVC1G3157DRYRG4 Analog Switches & Multiplexers ICs applications.
- Cellular phones
- FTTH
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Imaging
- Industrial and process control systems
- PDH Multiplexers
- Access Concentrators
- Medical systems
- Cell phones
- Remote wireless modules
