74LVC1G3157GF,132
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 15Ohm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.35mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC1G3157 |
| Pin Count | 6 |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40μA |
| Power Dissipation | 250mW |
| Propagation Delay | 1 ns |
| Turn On Delay Time | 8.7 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Supply Type | Single |
| Bandwidth | 300MHz |
| Turn-Off Delay Time | 6 ns |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 4ns, 3.5ns |
| Charge Injection | 7.5pC |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height Seated (Max) | 0.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC1G3157GF,132 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 6-XFDFN. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operating temperature extended to -40°C~125°C TA. Totally, there are 6 terminations. A electrical component with 2 channels is capable of high-quality output. If the voltage supply is 2.7V volts, the electrical component should be turned on and run. This electronic part can be found in the 6 series. Circuits based on SPDT switching are used to construct these analog switch ics. There are 1 circuits in this switch device. 74LVC1G3157 can be used to search for analog multiplexer variants. There is 15Ohm internal resistance in this digital multiplexer. Please refer to the datasheets for 6 pins functions. Users shouldn't supply more than 5.5V voltage to the switch device. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 1.65V. This digital switch can be operated with a current of 40μA. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. It is possible to transfer data over a 300MHz-bandwidth.
74LVC1G3157GF,132 Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 300MHz
74LVC1G3157GF,132 Applications
There are a lot of Nexperia USA Inc. 74LVC1G3157GF,132 Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- CSU
- Digital cross connects (DSX-1)
- DSLAMs
- Communication systems
- Channelized and Unchannelized DS3 applications
- USB 1.1 signal switching circuits
- Medical
- HDTV
- E1 Network Equipment
