Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-XFDFN |
Number of Pins |
6 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
Resistance |
15Ohm |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Number of Functions |
1 |
Terminal Pitch |
0.5mm |
Base Part Number |
74LVC1G3157 |
Pin Count |
6 |
Qualification Status |
Not Qualified |
Number of Channels |
2 |
Number of Circuits |
1 |
Operating Supply Current |
40μA |
Logic Function |
Demultiplexer, Multiplexer |
Supply Type |
Single |
Supply Current-Max (Isup) |
0.04mA |
-3db Bandwidth |
300MHz |
On-State Resistance (Max) |
10Ohm |
Multiplexer/Demultiplexer Circuit |
2:1 |
Current - Leakage (IS(off)) (Max) |
5μA |
Channel Capacitance (CS(off), CD(off)) |
6pF |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
4ns, 3.5ns |
Charge Injection |
7.5pC |
Switching |
BREAK-BEFORE-MAKE |
Voltage - Supply, Single (V+) |
1.65V~5.5V |
Drain to Source Resistance |
195Ohm |
Signal Current-Max |
0.05A |
RoHS Status |
ROHS3 Compliant |
74LVC1G3157GM-Q10X Overview
The electronic component is convenient to ship overseas because it is packed in a 6-XFDFN. The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 2:1. Increasing operating temperature to around -40°C~125°C TA. In total, there have been 6 terminations. High-quality output is provided by the electronic component's 2 channels. A key feature of the 6 series is the inclusion of this electronic part as part of its design. SPDT switching circuits are used in these analog switch ics. It consists of 1 circuits. Try searching with 74LVC1G3157 to find analog multiplexer variants. As far as internal resistance is concerned, it has 15Ohm. To find out what the 6 pins do, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. The digital multiplexer has a low cost Single supply. It would be sufficient to run this analogue multiplexer with 40μA current. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. There is 195Ohm resistance between the Drain and Source on this part.
74LVC1G3157GM-Q10X Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
-3db Bandwidth: 300MHz
Drain-to-Source resistance: 195Ohm
74LVC1G3157GM-Q10X Applications
There are a lot of Nexperia USA Inc. 74LVC1G3157GM-Q10X Analog Switches & Multiplexers ICs applications.
- Data switching
- Medical systems
- Microprocessor Controlled Analog Systems
- E1 Network Equipment
- DVD-R
- Precision data acquisition
- Microwave transmission systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Audio and video switching
- Low-Voltage