banner_page

74LVC1G3157GM,132

4ns, 3.5ns SPDT 10Ohm DUAL Analog Switches 74LVC1G3157 6 Pins 5μA 2.7V 6-XFDFN


  • Manufacturer: Nexperia USA Inc.
  • Nocochips NO: 554-74LVC1G3157GM,132
  • Package: 6-XFDFN
  • Datasheet: PDF
  • Stock: 288
  • Description: 4ns, 3.5ns SPDT 10Ohm DUAL Analog Switches 74LVC1G3157 6 Pins 5μA 2.7V 6-XFDFN(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-XFDFN
Number of Pins 6
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2003
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
Resistance 15Ohm
Terminal Finish Tin (Sn)
Max Power Dissipation 250mW
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.7V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number 74LVC1G3157
Pin Count 6
Number of Channels 2
Number of Circuits 1
Max Supply Voltage 5.5V
Min Supply Voltage 1.65V
Operating Supply Current 40μA
Power Dissipation 250mW
Propagation Delay 1 ns
Turn On Delay Time 8.7 ns
Logic Function Demultiplexer, Multiplexer
Supply Type Single
Bandwidth 300MHz
Turn-Off Delay Time 6 ns
On-State Resistance (Max) 10Ohm
Multiplexer/Demultiplexer Circuit 2:1
Off-state Isolation-Nom 42 dB
Current - Leakage (IS(off)) (Max) 5μA
Channel Capacitance (CS(off), CD(off)) 6pF
Switch Circuit SPDT
Switch Time (Ton, Toff) (Max) 4ns, 3.5ns
Charge Injection 7.5pC
Switch-off Time-Max 5ns
Voltage - Supply, Single (V+) 1.65V~5.5V
Height Seated (Max) 0.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

74LVC1G3157GM,132 Overview


The electronic component is convenient to ship overseas because it is packed in a 6-XFDFN. High reliability is achieved by using advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. The operating temperature is extended to around -40°C~125°C TA. Total terminations are 6. The electronic part provides high-quality output because it has 2 channels. Turning on and running the electrical part should be easy with a 2.7V voltage supply. An electrical component of this type can be found in the 6 series. These analog multiplexers are built based on SPDT switching circuits. The circuits in this analogue multiplexer number 1. Try searching for 74LVC1G3157 variants of the analog switch ic. It has an internal resistance of 15Ohm. To find out what the functions of 6 pins are, please refer to their datasheets. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. The digital multiplexer has a low cost Single supply. It is recommended to use 1.65V as the lowest voltage for the electrical part. This digital switch can be operated with a current of 40μA. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. The transfer of data can be performed over 300MHz bandwidths.

74LVC1G3157GM,132 Features


2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 300MHz

74LVC1G3157GM,132 Applications


There are a lot of Nexperia USA Inc. 74LVC1G3157GM,132 Analog Switches & Multiplexers ICs applications.

  • Precision test equipment
  • Microprocessor Controlled Analog Systems
  • Optical Applications
  • PBXs
  • Voice over IP/DSL – Integrated Access Devices, Smart
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • Audio/video switches
  • Wireless Local Loop
  • Modems
  • SDH/SONET multiplexers

Write a review

Note: HTML is not translated!
    Bad           Good