banner_page

74LVC1G3157GN,132

4ns, 3.5ns SPDT 10Ohm BOTTOM Analog Switches 74LVC1G3157 6 Pins 5μA 2.7V 6-XFDFN


  • Manufacturer: Nexperia USA Inc.
  • Nocochips NO: 554-74LVC1G3157GN,132
  • Package: 6-XFDFN
  • Datasheet: PDF
  • Stock: 137
  • Description: 4ns, 3.5ns SPDT 10Ohm BOTTOM Analog Switches 74LVC1G3157 6 Pins 5μA 2.7V 6-XFDFN(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-XFDFN
Number of Pins 6
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2003
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
Resistance 15Ohm
Terminal Finish Tin (Sn)
Terminal Position BOTTOM
Number of Functions 1
Supply Voltage 2.7V
Terminal Pitch 0.3mm
Base Part Number 74LVC1G3157
Pin Count 6
Number of Channels 2
Number of Circuits 1
Max Supply Voltage 5.5V
Min Supply Voltage 1.65V
Operating Supply Current 40μA
Power Dissipation 250mW
Propagation Delay 3 ns
Logic Function Demultiplexer, Demux, Multiplexer, Mux
Number of Inputs 2
Supply Type Single
-3db Bandwidth 300MHz
On-State Resistance (Max) 10Ohm
Multiplexer/Demultiplexer Circuit 2:1
Off-state Isolation-Nom 42 dB
Current - Leakage (IS(off)) (Max) 5μA
Channel Capacitance (CS(off), CD(off)) 6pF
Switch Circuit SPDT
Switch Time (Ton, Toff) (Max) 4ns, 3.5ns
Charge Injection 7.5pC
Switch-off Time-Max 5ns
Voltage - Supply, Single (V+) 1.65V~5.5V
Height Seated (Max) 0.35mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

74LVC1G3157GN,132 Overview


The electrical component comes in 6-XFDFN packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~125°C TA. There are 6 terminations totally. A high-quality output is provided by the electrical component's 2 channels. When the electronic component is given a voltage of 2.7V, it should be turned on and run. 6 pins are injected to the electronic part body. The analog switch ics are built using SPDT switching circuits. 1 circuits are used in this analogue multiplexer. Try searching for 74LVC1G3157 variants of the analog switch ic. As far as internal resistance is concerned, it has 15Ohm. You can find the functions of the 6 pins in the datasheets. Multiplexers should not be powered above 5.5V in normal situations. A analog switch ic that has a cost-effective Single supply type. 1.65V is the lowest voltage that should be fed to the electronic electronic part. The switch device would be able to operate with 40μA current. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. Operating the 2 inputs requires 2 inputs.

74LVC1G3157GN,132 Features


2 Channels
Switch Circuit: SPDT
40μA Supply Current
-3db Bandwidth: 300MHz

74LVC1G3157GN,132 Applications


There are a lot of Nexperia USA Inc. 74LVC1G3157GN,132 Analog Switches & Multiplexers ICs applications.

  • Access Concentrators
  • MP3 players
  • E1 Multiplexer
  • Audio and video signal routing
  • PDH Multiplexers
  • Industrial
  • Digital Cross-Connects
  • Central office
  • Private Branch Exchange (PBX)
  • Communication systems

Write a review

Note: HTML is not translated!
    Bad           Good