banner_page

74LVC1G3157GS,132

4ns, 3.5ns SPDT 10Ohm BOTTOM Analog Switches 74LVC1G3157 5μA 2.7V 6-XFDFN


  • Manufacturer: Nexperia USA Inc.
  • Nocochips NO: 554-74LVC1G3157GS,132
  • Package: 6-XFDFN
  • Datasheet: PDF
  • Stock: 534
  • Description: 4ns, 3.5ns SPDT 10Ohm BOTTOM Analog Switches 74LVC1G3157 5μA 2.7V 6-XFDFN(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-XFDFN
Number of Pins 6
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2003
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
Resistance 15Ohm
Terminal Finish Tin (Sn)
Max Power Dissipation 250mW
Terminal Position BOTTOM
Terminal Form NO LEAD
Number of Functions 1
Supply Voltage 2.7V
Terminal Pitch 0.35mm
Base Part Number 74LVC1G3157
Number of Channels 2
Number of Circuits 1
Max Supply Voltage 5.5V
Min Supply Voltage 1.65V
Operating Supply Current 40μA
Power Dissipation 250mW
Propagation Delay 3 ns
Logic Function Demultiplexer, Multiplexer
Number of Inputs 2
Supply Type Single
-3db Bandwidth 300MHz
On-State Resistance (Max) 10Ohm
High Level Output Current 50mA
Low Level Output Current 50mA
Multiplexer/Demultiplexer Circuit 2:1
Off-state Isolation-Nom 42 dB
Current - Leakage (IS(off)) (Max) 5μA
Channel Capacitance (CS(off), CD(off)) 6pF
Switch Circuit SPDT
Switch Time (Ton, Toff) (Max) 4ns, 3.5ns
Charge Injection 7.5pC
Switch-off Time-Max 5ns
Voltage - Supply, Single (V+) 1.65V~5.5V
Drain to Source Resistance 195Ohm
Height Seated (Max) 0.35mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant

74LVC1G3157GS,132 Overview


Shipping overseas is convenient with the electronic component packed in 6-XFDFN. High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Operation at a temperature around -40°C~125°C TA. In total, there have been 6 terminations. Due to its 2 channels, the electrical component produces high-quality output. An 2.7V voltage supply should allow the electrical part to be turned on and run. The analog switch ics are built using SPDT switching circuits. It consists of 1 circuits. Try searching for the analog switch ic with 74LVC1G3157 if you are looking for variants. As far as internal resistance is concerned, it has 15Ohm. Datasheets for functions of 6 pins are available. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage fed to the electronic component should be 1.65V. For this digital switch to work, 40μA current would suffice. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. Among the inputs that can be operated are the 2 inputs. Drain to Source resistance for this electronic component is 195Ohm.

74LVC1G3157GS,132 Features


2 Channels
Switch Circuit: SPDT
40μA Supply Current
-3db Bandwidth: 300MHz
Drain-to-Source resistance: 195Ohm

74LVC1G3157GS,132 Applications


There are a lot of Nexperia USA Inc. 74LVC1G3157GS,132 Analog Switches & Multiplexers ICs applications.

  • Medical systems
  • Sample-and-hold systems
  • Channelized and Unchannelized DS3 applications
  • Voice over IP/DSL – Integrated Access Devices, Smart
  • Routers
  • Audio and video switching
  • Multi-Line E1 Interface Cards
  • Residential Gateways, Home Gateway/Router
  • PDAs
  • Digital cross connects (DSX-1)

Write a review

Note: HTML is not translated!
    Bad           Good