74LVC1G3157GV-Q10H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74, SOT-457 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 15Ohm |
| Base Part Number | 74LVC1G3157 |
| Pin Count | 6 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40μA |
| Power Dissipation | 250mW |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 2 |
| Supply Type | Single |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 4ns, 3.5ns |
| Charge Injection | 7.5pC |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74LVC1G3157GV-Q10H Overview
Shipping overseas is convenient due to the electrical component's packing in SC-74, SOT-457. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature around -40°C~125°C TA extended. The electronic part body is injected with 6 pins. SPDT switching circuits are used in these analog switch ics. 1 circuits are used in this analogue multiplexer. Try searching for the analog switch ic with 74LVC1G3157 if you are looking for variants. There is 15Ohm internal resistance in this digital multiplexer. To find out what the 6 pins do, please refer to the datasheets. normally, users should not supply switches with voltages higher than 5.5V. Digital switch that provides Single power at a cost-effective price. 1.65V is the lowest voltage that should be fed to the electronic electronic part. The analogue multiplexer could operate on 40μA current. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. The electrical component supports 2 inputs.
74LVC1G3157GV-Q10H Features
Switch Circuit: SPDT
40μA Supply Current
-3db Bandwidth: 300MHz
74LVC1G3157GV-Q10H Applications
There are a lot of Nexperia USA Inc. 74LVC1G3157GV-Q10H Analog Switches & Multiplexers ICs applications.
- Audio and video routing
- Fault Tolerant Systems
- Battery Powered Systems
- Channelized and Unchannelized DS3 applications
- Medical Instrumentation
- Cable Modem
- Avionics
- Microwave transmission systems
- Battery-powered systems
- Avionics and Military Systems
