74LVC1G373DBVRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 6.492041mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC1G373 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 4 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 32mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.032 A |
| Control Type | ENABLE LOW/HIGH |
| Number of Output Lines | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC1G373DBVRE4 Overview
It is embedded in the SOT-23-6 package. As a result, it has a packaging of Tape & Reel (TR). The output it is configured with uses Tri-State. There is D-Type Transparent Latch logic type for this electrical device. This electronic part is mounted in the way of Surface Mount. A 1.65V~3.6V voltage supply is required for operation. During operation, the temperature is set at -40°C~125°C. The 74LVC series contains FPGAs of this type. 1 Bits are used in the design of this electronic part. A device with this design has 6 terminations. 74LVC1G373 is the family name of it. The supply voltage of the device is 1.8V. 6 pins are provided. In terms of electronic devices, this one is in the LVC/LCX/Z family. With the design of the board, there are only 6 pins. The electronic part is mounted in a way that corresponds to Surface Mount. As far as ports are concerned, this device has 2 ports. The part belongs to the FF/Latches subcategory. It is possible to reach 5.5V when the maximum supply voltage (Vsup) has been reached. The device is powered by 3.3V power supplies. Its reliable performance makes it an excellent choice for TR. There are 1 output lines that correspond to the binary equivalents of the input line. The current consumed by the device is 10μA volts in quiescent mode, which cannot be affected by external factors.
74LVC1G373DBVRE4 Features
SOT-23-6 package
74LVC series
1 Bits
74LVC1G373 family
6 pin count
6 pins
3.3V power supplies
74LVC1G373DBVRE4 Applications
There are a lot of Texas Instruments 74LVC1G373DBVRE4 Latches applications.
- Timers
- Pseudo-random code generators
- Serial Output Data Queuing
- Automatic test equipment
- Parallel data storage
- Decade counting 7-segment decimal display
- Shift register
- Clocks
- Audio and video switching
- Bus system register with enable parallel lines at bus side
