banner_page

74LVC1G373DCKRE4

D-Type, Latch 1.65V~3.6V 1 Bits Tri-State Latches 74LVC Series 74LVC1G373 6 Pins DUAL CMOS 6-TSSOP, SC-88, SOT-363


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-74LVC1G373DCKRE4
  • Package: 6-TSSOP, SC-88, SOT-363
  • Datasheet: PDF
  • Stock: 775
  • Description: D-Type, Latch 1.65V~3.6V 1 Bits Tri-State Latches 74LVC Series 74LVC1G373 6 Pins DUAL CMOS 6-TSSOP, SC-88, SOT-363(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-TSSOP, SC-88, SOT-363
Number of Pins 6
Weight 2.494758mg
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Series 74LVC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 1.65V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.8V
Base Part Number 74LVC1G373
Pin Count 6
Output Type Tri-State
Circuit 1:1
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3.3V
Number of Circuits 1
Number of Ports 2
Number of Bits 1
Propagation Delay 17.4 ns
Quiescent Current 10μA
Turn On Delay Time 1 ns
Family LVC/LCX/Z
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 32mA 32mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.032 A
Control Type ENABLE LOW/HIGH
Number of Output Lines 1
Count Direction UNIDIRECTIONAL
Translation N/A
Height 1.1mm
Length 2mm
Width 1.25mm
Thickness 900μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

74LVC1G373DCKRE4 Overview


In the 6-TSSOP, SC-88, SOT-363 package, it can be found as an embedded module. Tape & Reel (TR) is the way it is packaged. It is configured with an output of Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. With a supply voltage of 1.65V~3.6V, it operates. A temperature of -40°C~125°C is set as the operating temperature. An FPGA in this series belongs to the 74LVC family. 1 Bits are used in the design of this electronic part. This device has been designed with 6 terminations available. There is no doubt that it belongs to the family 74LVC1G373. In order to operate it, the supply voltage must be 1.8V. The device is equipped with 6 pins. This electronic device belongs to the family of LVC/LCX/Z. This board has 6 pins on it, which is what it is designed for. Mounting this electronic component follows the Surface Mount method. This device has a total of 2 ports. In the subcategory FF/Latches, this part belongs. The maximal supply voltage (Vsup) reaches 5.5V. The device is powered by 3.3V power supplies. Considering the reliability of this device, it would be a good candidate for TR. There are 1 output lines that correspond to the binary equivalents of the input line. Without external influences, it consumes 10μA of quiescent current. It achieves superior flexibility by using 1 circuits.

74LVC1G373DCKRE4 Features


6-TSSOP, SC-88, SOT-363 package
74LVC series
1 Bits
74LVC1G373 family
6 pin count
6 pins
3.3V power supplies

74LVC1G373DCKRE4 Applications


There are a lot of Texas Instruments 74LVC1G373DCKRE4 Latches applications.

  • General-Purpose Register
  • Bus system register with enable parallel lines at bus side
  • Communication systems
  • Counter
  • Display
  • Hammer
  • Up-Down Johnson
  • Pseudo-random code generators
  • Serial Input
  • Pattern Generators

Write a review

Note: HTML is not translated!
    Bad           Good