74LVC1G384GM,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 15Ohm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC1G384 |
| Pin Count | 6 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 100mA |
| Max Supply Current | 200μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 10 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 7.4 ns |
| -3db Bandwidth | 500MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 4.2ns, 5ns |
| Charge Injection | 7.5pC |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height Seated (Max) | 0.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74LVC1G384GM,115 Overview
The electrical component comes in 6-XFDFN packaging, which makes it convenient to ship overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. Totally, there are 6 terminations. As a result of its 1 channels, this electronic component provides high-quality output. In the case of a voltage supply of 2.7V volts, the electrical part can be powered up and run. A total of 6 pins are injected into the body of the electronic part. Circuits based on SPST - NC switching are used to construct these analog switch ics. This multiplexer is composed of 1 circuits. 74LVC1G384 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 15Ohm. Datasheets for 6 pin functions are available upon request. Multiplexers should not be powered above 5.5V in normal situations. An effective Single supply digital multiplexer. There should be 1.65V voltage fed to the electrical part below 1.65V. For this digital switch to work, 200μA current would suffice. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. If you put voltage higher than 200μA on the digital multiplexer, damage may occur. It can operate from 5V operating voltages.
74LVC1G384GM,115 Features
1 Channels
Switch Circuit: SPST - NC
200μA Supply Current
-3db Bandwidth: 500MHz
74LVC1G384GM,115 Applications
There are a lot of Nexperia USA Inc. 74LVC1G384GM,115 Analog Switches & Multiplexers ICs applications.
- Precision test equipment
- DVD-R
- Multi-Line E1 Interface Cards
- Cell phones
- Industrial and process control systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Automatic test equipment
- Modems
- MP3 players
- Private Branch Exchange (PBX)
