Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-XFDFN |
Number of Pins |
6 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2014 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
Resistance |
15Ohm |
Terminal Finish |
Tin (Sn) |
Max Power Dissipation |
250mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.7V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74LVC1G384 |
Pin Count |
6 |
Operating Supply Voltage |
5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.65V |
Operating Supply Current |
200μA |
Nominal Supply Current |
100nA |
Power Dissipation |
250mW |
Max Supply Current |
200μA |
Throw Configuration |
SPST |
Turn On Delay Time |
10 ns |
Number of Inputs |
1 |
Supply Type |
Single |
Turn-Off Delay Time |
7.4 ns |
-3db Bandwidth |
500MHz |
On-State Resistance (Max) |
10Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Current - Leakage (IS(off)) (Max) |
5μA |
Channel Capacitance (CS(off), CD(off)) |
5pF |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
4.2ns, 5ns |
Charge Injection |
7.5pC |
Voltage - Supply, Single (V+) |
1.65V~5.5V |
Height Seated (Max) |
0.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
74LVC1G384GM,132 Overview
As the electronic part is packed in 6-XFDFN, international shipping is convenient. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 1:1. The operating temperature is extended to around -40°C~125°C TA. Total terminations are 6. Due to its 1 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 2.7V voltage supply. A key feature of the 6 series is the inclusion of this electronic part as part of its design. These analog multiplexers are built based on SPST - NC switching circuits. Try searching for the analog switch ic with 74LVC1G384 if you are looking for variants. A 15Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 6 pins functions. Users should never supply a voltage higher than 5.5V to a switch device. A cost-effective Single supply type analogue multiplexer. It is recommended that the electrical component receives a voltage of 1.65V. This multiplexer would work with 200μA current. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 200μA. The electrical part can be operated at 5V voltage levels. Operating the 1 inputs requires 1 inputs.
74LVC1G384GM,132 Features
1 Channels
Switch Circuit: SPST - NC
200μA Supply Current
-3db Bandwidth: 500MHz
74LVC1G384GM,132 Applications
There are a lot of Nexperia USA Inc. 74LVC1G384GM,132 Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- T1/E1 Terminals
- SONET
- E1 Network Equipment
- SDH/SONET multiplexers
- Remote wireless modules
- Public switching systems
- CSU
- MP3 players
- Communication systems