74LVC1G384GN,132

4.2ns, 5ns SPST - NC 10Ohm DUAL Analog Switches 74LVC1G384 6 Pins 5μA 2.7V 6-XFDFN

Manufacturer: Nexperia USA Inc.
Nocochips NO: 554-74LVC1G384GN,132
Package: 6-XFDFN
Datasheet: PDF
Stock: 215
Description: 4.2ns, 5ns SPST - NC 10Ohm DUAL Analog Switches 74LVC1G384 6 Pins 5μA 2.7V 6-XFDFN(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	6-XFDFN
Number of Pins	6
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2010
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
Resistance	15Ohm
Terminal Finish	Tin (Sn)
Technology	CMOS
Terminal Position	DUAL
Terminal Form	NO LEAD
Number of Functions	1
Supply Voltage	2.7V
Terminal Pitch	0.3mm
Base Part Number	74LVC1G384
Pin Count	6
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	200μA
Throw Configuration	SPST
Supply Type	Single
-3db Bandwidth	500MHz
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	46 dB
Current - Leakage (IS(off)) (Max)	5μA
Channel Capacitance (CS(off), CD(off))	5pF
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	4.2ns, 5ns
Charge Injection	7.5pC
Switch-on Time-Max	8ns
Switch-off Time-Max	9.5ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Height Seated (Max)	0.35mm
RoHS Status	ROHS3 Compliant

74LVC1G384GN,132 Overview

Due to its 6-XFDFN packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Around -40°C~125°C TA is the extended operating temperature. In total, 6 terminations have occurred. High-quality output is provided by the electronic component's 1 channels. Powered by a 2.7V voltage supply, the electrical part should be switched on and run. A total of 6 pins are injected into the electrical part body. A SPST - NC switching circuit is used for these analog switches. The circuits in this analogue multiplexer number 1. Search with 74LVC1G384 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 15Ohm. To find out what the 6 pins do, please refer to the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. 1.65V is the lowest voltage that should be fed to the electronic electronic part. For this digital switch to work, 200μA current would suffice. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts.