74LVC1G384GS,132
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.35mm |
| Base Part Number | 74LVC1G384 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 200μA |
| Throw Configuration | SPST |
| Propagation Delay | 3 ns |
| Supply Type | Single |
| -3db Bandwidth | 500MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 46 dB |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 4.2ns, 5ns |
| Charge Injection | 7.5pC |
| Switch-on Time-Max | 8ns |
| Switch-off Time-Max | 9.5ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height Seated (Max) | 0.35mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 15Ohm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
74LVC1G384GS,132 Overview
Due to its 6-XFDFN packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature around -40°C~125°C TA extended. Totally, there are 6 terminations. A 1 channel electronic part produces high-quality output. Powered by a 2.7V voltage supply, the electrical part should be switched on and run. Unlike digital switches, these are based on SPST - NC switching circuits. A total of 1 circuits make up this switch device. Try searching with 74LVC1G384 if you're looking for variants. Internally, this switch multiplexer has a resistance of 15Ohm. To find out what the functions of 6 pins are, please refer to their datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. There should be 1.65V voltage fed to the electrical part below 1.65V. The analogue multiplexer could operate on 200μA current. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply.
74LVC1G384GS,132 Features
1 Channels
Switch Circuit: SPST - NC
200μA Supply Current
-3db Bandwidth: 500MHz
74LVC1G384GS,132 Applications
There are a lot of Nexperia USA Inc. 74LVC1G384GS,132 Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- Access Concentrators
- Low-Voltage
- SONET
- Remote wireless modules
- Relay Replacement
- Precision test equipment
- PBX interfaces
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Multi-Line E1 Interface Cards
