74LVC1G53DC-Q100H

3.8ns, 3.8ns SPDT 10Ohm DUAL Analog Switches 74LVC1G53 8 Pins 5μA 3.3V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Nexperia USA Inc.
Nocochips NO: 554-74LVC1G53DC-Q100H
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: PDF
Stock: 818
Description: 3.8ns, 3.8ns SPDT 10Ohm DUAL Analog Switches 74LVC1G53 8 Pins 5μA 3.3V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2003
Series	Automotive, AEC-Q100
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	15Ohm
Max Power Dissipation	250mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	0.5mm
Base Part Number	74LVC1G53
Pin Count	8
Number of Channels	2
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	40μA
Logic Function	Demultiplexer, Multiplexer
Supply Type	Single
-3db Bandwidth	300MHz
On-State Resistance (Max)	10Ohm
High Level Output Current	50mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	5μA
Channel Capacitance (CS(off), CD(off))	6pF
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	3.8ns, 3.8ns
Charge Injection	7.5pC
Voltage - Supply, Single (V+)	1.65V~5.5V
Length	2.3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

74LVC1G53DC-Q100H Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-VFSOP (0.091, 2.30mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~125°C TA. Total terminations are 8. Due to its 2 channels, the electrical component produces high-quality output. If the voltage supply is 3.3V volts, the electrical component should be turned on and run. A total of 8 pins are injected into the body of the electronic part. On the other hand, analog switches can be constructed using SPDT switching circuits. A total of 1 circuits make up this switch device. Try searching for the analog switch ic with 74LVC1G53 if you are looking for variants. Analog switches have 15Ohm internal resistance. For details about the functions of 8 pins, please refer to the datasheets. Multiplexers should not be powered above 5.5V in normal situations. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage the electronic part should receive is 1.65V. 40μA current would be enough for this multiplexer to operate. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. Automotive, AEC-Q100 is a series number.