banner_page

74LVC1G53DP-Q100H

3.8ns, 3.8ns SPDT 10Ohm Analog Switches 74LVC1G53 8 Pins 5μA 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)


  • Manufacturer: Nexperia USA Inc.
  • Nocochips NO: 554-74LVC1G53DP-Q100H
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 869
  • Description: 3.8ns, 3.8ns SPDT 10Ohm Analog Switches 74LVC1G53 8 Pins 5μA 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C TA
Packaging Tape & Reel (TR)
Published 2010
Series Automotive, AEC-Q100
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Resistance 15Ohm
Base Part Number 74LVC1G53
Pin Count 8
Number of Circuits 1
Max Supply Voltage 5.5V
Min Supply Voltage 1.65V
Operating Supply Current 40μA
Power Dissipation 250mW
Logic Function Demultiplexer, Multiplexer
Number of Inputs 2
Supply Type Single
-3db Bandwidth 300MHz
On-State Resistance (Max) 10Ohm
Multiplexer/Demultiplexer Circuit 2:1
Current - Leakage (IS(off)) (Max) 5μA
Channel Capacitance (CS(off), CD(off)) 6pF
Switch Circuit SPDT
Switch Time (Ton, Toff) (Max) 3.8ns, 3.8ns
Charge Injection 7.5pC
Voltage - Supply, Single (V+) 1.65V~5.5V
Radiation Hardening No
RoHS Status ROHS3 Compliant

74LVC1G53DP-Q100H Overview


As the electronic part is packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), international shipping is convenient. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 2:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. Into the electrical component body are injected 8 pins. Multiplexers built on a SPDT switching circuit are built. A 1 circuit is present in this switch device. Using the 74LVC1G53 search parameter, you can discover variants of the switch. A 15Ohm internal resistance characterizes this multiplexer. The datasheets for the 8 pins explain the functions. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Digital switch that provides Single power at a cost-effective price. It is recommended to use 1.65V as the lowest voltage for the electrical part. This multiplexer would work with 40μA current. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. There are 2 inputs to be operated. This is one of the Automotive, AEC-Q100 series.

74LVC1G53DP-Q100H Features


Switch Circuit: SPDT
40μA Supply Current
-3db Bandwidth: 300MHz

74LVC1G53DP-Q100H Applications


There are a lot of Nexperia USA Inc. 74LVC1G53DP-Q100H Analog Switches & Multiplexers ICs applications.

  • Medical systems
  • Battery Powered Systems
  • Industrial
  • Microprocessor Controlled Analog Systems
  • Sample hold systems
  • Audio and video routing
  • Sample-and-hold systems
  • Digital access cross connects
  • Microwave transmission systems
  • Isolation

Write a review

Note: HTML is not translated!
    Bad           Good