74LVC1G53DP,125
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 15Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC1G53 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40μA |
| Power Dissipation | 250mW |
| Propagation Delay | 800 ps |
| Turn On Delay Time | 6.7 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Supply Type | Single |
| Bandwidth | 300MHz |
| Turn-Off Delay Time | 6.8 ns |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 3.8ns, 3.8ns |
| Charge Injection | 7.5pC |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Drain to Source Resistance | 7.5Ohm |
| Length | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC1G53DP,125 Overview
As the electronic part is packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), international shipping is convenient. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 2:1. Increasing operating temperature to around -40°C~125°C TA. 8 terminations have been made so far. This electronic part offers high-quality output due to its 2 channels. In the case of a voltage supply of 2.7V volts, the electrical part can be powered up and run. Into the electrical component body are injected 8 pins. Unlike digital switches, these are based on SPDT switching circuits. This multiplexer is composed of 1 circuits. Try searching with 74LVC1G53 if you're looking for variants. A 15Ohm internal resistance characterizes this multiplexer. For functions related to 8 pins, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. A cost-effective Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 1.65V. In order to operate this switch device, it would need a current of 40μA. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. This switch operates within the bandwidth of 300MHz. Drain to Source resistance is 7.5Ohm.
74LVC1G53DP,125 Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 300MHz
Drain-to-Source resistance: 7.5Ohm
74LVC1G53DP,125 Applications
There are a lot of Nexperia USA Inc. 74LVC1G53DP,125 Analog Switches & Multiplexers ICs applications.
- Frame Relay Equipment
- Private Branch Exchange (PBX)
- Cable PC
- PCMCIA cards
- Avionics and Military Systems
- Audio/video switches
- Microprocessor Controlled Analog Systems
- Mechanical reed relay replacement
- CSU
- Battery-powered systems
