74LVC1G53GD,125

3.8ns, 3.8ns SPDT 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74LVC1G53 8 Pins 5μA 2.7V 8-XFDFN

Manufacturer: Nexperia USA Inc.
Nocochips NO: 554-74LVC1G53GD,125
Package: 8-XFDFN
Datasheet: PDF
Stock: 543
Description: 3.8ns, 3.8ns SPDT 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74LVC1G53 8 Pins 5μA 2.7V 8-XFDFN(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-XFDFN
Number of Pins	8
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2011
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	15Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	250mW
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.7V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	74LVC1G53
Pin Count	8
Polarity	Non-Inverting
Power Supplies	3.3V
Number of Channels	2
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	40μA
Propagation Delay	800 ps
Turn On Delay Time	6.7 ns
Logic Function	Demultiplexer, Multiplexer
Supply Type	Single
Bandwidth	300MHz
Supply Current-Max (Isup)	0.04mA
Turn-Off Delay Time	6.8 ns
On-State Resistance (Max)	10Ohm
High Level Output Current	50mA
Low Level Output Current	50mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	40 dB
Current - Leakage (IS(off)) (Max)	5μA
Channel Capacitance (CS(off), CD(off))	6pF
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	3.8ns, 3.8ns
Charge Injection	7.5pC
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.65V~5.5V
Height Seated (Max)	0.5mm
Length	3mm
Radiation Hardening	No
RoHS Status	RoHS Compliant

74LVC1G53GD,125 Overview

As the electronic part is packed in 8-XFDFN, international shipping is convenient. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. There is 2:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. In total, there have been 8 terminations. A high-quality output is provided by the electrical component's 2 channels. If the voltage supply is 2.7V volts, the electrical component should be turned on and run. It is injected into the electrical part body with 8 pins. These analog multiplexers are built based on SPDT switching circuits. The multiplexer consists of 1 circuits. Try searching with 74LVC1G53 if you're looking for variants. A 15Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 8 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Digital switch that provides Single power at a cost-effective price. It is recommended to use 1.65V as the lowest voltage for the electrical part. The switch device would be able to operate with 40μA current. The voltage required by this switch device is 1.65V~5.5V, draining from a single voltage supply. This switch operates within the bandwidth of 300MHz.