74LVC1G53GF,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 15Ohm |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.35mm |
| Base Part Number | 74LVC1G53 |
| Pin Count | 8 |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40μA |
| Power Dissipation | 250mW |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 2 |
| Supply Type | Single |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 10Ohm |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 3.8ns, 3.8ns |
| Charge Injection | 7.5pC |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height Seated (Max) | 0.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC1G53GF,115 Overview
Packed in 8-XFDFN, the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Extended operating temperature around -40°C~125°C TA. Total terminations are 8. By its 2 channels, the electronic component provides high-quality output. If the voltage supply is 3.3V volts, the electrical component should be turned on and run. The electrical component body receives 8 pins. A SPDT switching circuit is used to build these analog multiplexers. There are 1 circuits in this switch device. Try searching with 74LVC1G53 to find analog multiplexer variants. As far as internal resistance is concerned, it has 15Ohm. You can find the functions of the 8 pins in the datasheets. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage the electronic part should receive is 1.65V. This multiplexer would work with 40μA current. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. Among the inputs that can be operated are the 2 inputs.
74LVC1G53GF,115 Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
-3db Bandwidth: 300MHz
74LVC1G53GF,115 Applications
There are a lot of Nexperia USA Inc. 74LVC1G53GF,115 Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- Medical
- ISDN NT1/TA
- High speed data transmission line cards
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Medical Instrumentation
- New designs requiring multiplexer functions
- Data switching
- 65 V DACs
- Access Concentrators
