Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-XFDFN |
Number of Pins |
6 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
Resistance |
15Ohm |
Terminal Finish |
Tin (Sn) |
Max Power Dissipation |
250mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.7V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74LVC1G66 |
Pin Count |
6 |
Operating Supply Voltage |
5V |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.65V |
Operating Supply Current |
200μA |
Number of Ports |
2 |
Nominal Supply Current |
100mA |
Power Dissipation |
250mW |
Max Supply Current |
200μA |
Number of Bits |
1 |
Throw Configuration |
SPST |
Turn On Delay Time |
5.3 ns |
Family |
LVC/LCX/Z |
Number of Inputs |
1 |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Turn-Off Delay Time |
4.2 ns |
Output Polarity |
TRUE |
Logic IC Type |
BUS DRIVER |
-3db Bandwidth |
500MHz |
On-State Resistance (Max) |
10Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Current - Leakage (IS(off)) (Max) |
5μA |
Channel Capacitance (CS(off), CD(off)) |
6.5pF |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
4.2ns, 5ns |
Charge Injection |
7.5pC |
Voltage - Supply, Single (V+) |
1.65V~5.5V |
Height |
460μm |
Length |
1.5mm |
Width |
1.05mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
74LVC1G66GM,115 Overview
The electrical component comes in 6-XFDFN packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 1:1. Around -40°C~125°C TA is the extended operating temperature. Total terminations are 6. In the case of a voltage supply of 2.7V volts, the electrical part can be powered up and run. Electronic part bodies are injected with 6 pins. These analog multiplexers are built based on SPST - NO switching circuits. Try searching for the analog switch ic with 74LVC1G66 if you are looking for variants. Analog switches have 15Ohm internal resistance. Datasheets for 6 pin functions are available upon request. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage the electronic part should receive is 1.65V. For this multiplexer to operate, 200μA current would be sufficient. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 200μA. It can operate from 5V operating voltages. A 1 input needs to be operated. It conducts in a 1-bit manner.
74LVC1G66GM,115 Features
Switch Circuit: SPST - NO
200μA Supply Current
-3db Bandwidth: 500MHz
1-Bit
74LVC1G66GM,115 Applications
There are a lot of Nexperia USA Inc. 74LVC1G66GM,115 Analog Switches & Multiplexers ICs applications.
- Transmit
- FTTH
- CSU
- PBX interfaces
- Access Concentrators
- High reliability control systems
- Precision instrumentation
- Digital cross connects (DSX-1)
- Frame Relay Equipment
- Cross Connects