74LVC1G66GN,132
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 10Ohm |
| Terminal Finish | Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.3mm |
| Base Part Number | 74LVC1G66 |
| Pin Count | 6 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Number of Ports | 2 |
| Power Dissipation | 250mW |
| Number of Bits | 1 |
| Family | LVC/LCX/Z |
| Number of Inputs | 1 |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| -3db Bandwidth | 500MHz |
| On-State Resistance (Max) | 10Ohm |
| Propagation Delay (tpd) | 3 ns |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 6.5pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 4.2ns, 5ns |
| Charge Injection | 7.5pC |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height Seated (Max) | 0.35mm |
| RoHS Status | ROHS3 Compliant |
74LVC1G66GN,132 Overview
This electronic part is conveniently packaged in 6-XFDFN, making it easy to ship abroad. The advanced packaging method Tape & Reel (TR) provides high reliability. This analog switch is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature extended to -40°C~125°C TA. There are 6 terminations totally. Powered by a 3.3V voltage supply, the electrical part should be switched on and run. This electronic part can be found in the 6 series. The analog switch ics are built using SPST - NO switching circuits. 74LVC1G66 can be used to search for analog multiplexer variants. This digital multiplexer has 10Ohm internal resistance. The functions of 6 pins can be found in the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. It is recommended to use 1.65V as the lowest voltage for the electrical part. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. The electrical component supports 1 inputs. It is capable of carrying out 1-bit operation.
74LVC1G66GN,132 Features
Switch Circuit: SPST - NO
-3db Bandwidth: 500MHz
1-Bit
74LVC1G66GN,132 Applications
There are a lot of Nexperia USA Inc. 74LVC1G66GN,132 Analog Switches & Multiplexers ICs applications.
- Transmit
- Wireless Local Loop
- Fault Tolerant Systems
- Precision instrumentation
- Industrial and process control systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Digital access cross connects
- Public switching systems
- Ultrasound
- Cable Telephony – NIU, Set-Top Box, Home Side Box
