74LVC1G74DP,125
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC1G74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Output Current | 50mA |
| Number of Bits | 1 |
| Clock Frequency | 200MHz |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 32mA 32mA |
| Output Polarity | COMPLEMENTARY |
| Max Propagation Delay @ V, Max CL | 4.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| fmax-Min | 200 MHz |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
74LVC1G74DP,125 Overview
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)is the packaging method. Package Tape & Reel (TR)embeds it. T flip flop uses Differentialas its output configuration. This trigger is configured to use Positive Edge. Surface Mountmounts this electrical part. With a supply voltage of 1.65V~5.5V volts, it operates. It is at -40°C~125°C TAdegrees Celsius that the system is operating. It belongs to the type D-Typeof flip flops. The 74LVCseries comprises this type of FPGA. A frequency of 200MHzshould not be exceeded by its output. In total, there are 1 elements. This process consumes 40μA quiescents. It has been determined that there have been 8 terminations. JK flip flop belongs to 74LVC1G74 family. A voltage of 1.8V provides power to the D latch. This JK flip flop has a 4pFfarad input capacitance. In this case, the D flip flop belongs to the LVC/LCX/Zfamily. There are 8pins on it. It is designed with a number of bits of 1. In this case, the maximum supply voltage (Vsup) reaches 5.5V. In addition to its maximum design flexibility, the output current of the T flip flop is 50mA.
74LVC1G74DP,125 Features
Tape & Reel (TR) package
74LVC series
8 pins
1 Bits
74LVC1G74DP,125 Applications
There are a lot of Nexperia USA Inc. 74LVC1G74DP,125 Flip Flops applications.
- CMOS Process
- Buffer registers
- Matched Rise and Fall
- Data Synchronizers
- Consumer
- Convert a momentary switch to a toggle switch
- Data transfer
- Data storage
- Load Control
- Shift Registers
