74LVC1G74GS,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74LVC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Max Power Dissipation | 300mW |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.35mm |
| Base Part Number | 74LVC1G74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Bits | 1 |
| Clock Frequency | 200MHz |
| Propagation Delay | 13.4 ns |
| Quiescent Current | 100nA |
| Turn On Delay Time | 2.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 32mA 32mA |
| Max Propagation Delay @ V, Max CL | 4.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| fmax-Min | 200 MHz |
| Max Supply Voltage (DC) | 5.5V |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 0.35mm |
| RoHS Status | ROHS3 Compliant |
74LVC1G74GS,115 Overview
It is embeded in 8-XFDFN case. It is contained within the Tape & Reel (TR)package. The output it is configured with uses Differential. There is a trigger configured with Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 1.65V~5.5Vis required for its operation. It is at -40°C~125°C TAdegrees Celsius that the system is operating. This electronic flip flop is of type D-Type. In this case, it is a type of FPGA belonging to the 74LVC series. You should not exceed 200MHzin the output frequency of the device. A total of 1elements are present in it. It consumes 40μA of quiescent current without being affected by external factors. A total of 8terminations have been recorded. It is a member of the 74LVC1G74 family. A voltage of 1.8V is used to power it. A 4pFfarad input capacitance is provided by this T flip flop. Electronic devices of this type belong to the LVC/LCX/Zfamily. There is an electronic part that is mounted in the way of Surface Mount. With its 8pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. An electronic part designed with 1bits is used in this application. There is 100nA quiescent current consumption by it.
74LVC1G74GS,115 Features
Tape & Reel (TR) package
74LVC series
8 pins
1 Bits
74LVC1G74GS,115 Applications
There are a lot of Nexperia USA Inc. 74LVC1G74GS,115 Flip Flops applications.
- Communications
- Control circuits
- Single Up Count-Control Line
- ESD protection
- Clock pulse
- ESD performance
- Single Down Count-Control Line
- Balanced 24 mA output drivers
- Safety Clamp
- Storage Registers
